tools
  • Large text
  • Medium text
  • Small text
  • text size

Mobil SHC 600 Series 

Mobil SHC™ 600 Series

Marine gears and bearings lubricant

Watch our next generation SHC video >>

Mobil SHC™ 600 Series is a range of synthetic oils for marine gears and bearings developed for a wide range of uses including:

 

  • Applications with heavy loads or extreme operating conditions
  • Fuel and lubricant centrifuges and purifiers
  • Applications where component replacement, system cleaning and lubricant changes are high

Greatly outperforms standard mineral oils
Formulated from synthetic base oils with a high viscosity index and a proprietary additive system, Mobil SHC 600 Series provides:

  • Strong performance in extreme high or low temperature conditions
  • Exceptional resistance to rust and corrosion, extending component life and minimising downtime
  • Excellent demulsibility
  • Outstanding foam control and air-release properties

Lowers operating costs
The lubricants’ low fluid friction cuts operating temperatures compared with mineral-based alternatives. This improves gear efficiency and reduces power consumption. Also, Mobil SHC 600 Series lasts up to six times longer than mineral oils, extending drain intervals.

Mobil SHC 600 Series offers a range of advantages including:

  • Low maintenance costs thanks to thermal and oxidation resistance
  • Outstanding compatibility with seals and other materials normally lubricated with mineral oils
  • Minimised waste and disposal costs

Download the Mobil SHC 600 Series fact sheet >>

The Mobil SHC brand of lubricants are recognized and appreciated around the world for their innovation and outstanding performance. These synthetic products, molecularly designed and pioneered by our research scientists, embody the continuing commitment to using advanced technology to provide outstanding lubricant products. The development of Mobil SHC 600 Series was preceded by close contacts between our scientists and application specialists with key Original Equipment Manufacturers (OEMs) to ensure that the products provide exceptional performance in the continually evolving industrial equipment designs.

Our work with key equipment builders has helped confirm the results from our own laboratory and rig tests showing the exceptional performance of Mobil SHC 600 Series lubricants. Not least among the benefits, shown in work with OEMs, is the potential for energy efficiency improvements up to 3.6% relative to mineral oils (*). These benefits are particularly evident in equipment with a high level of mechanical losses, such as high ratio worm gears.

To develop the latest Mobil SHC technology for Mobil SHC 600 Series oils, our product formulation scientists chose select base oils because of their exceptional thermal/oxidative resistance potential and combined them with a balanced additive system, which complements the inherent benefits of the base oils to provide excellent oil life, deposit control and resistance to thermal/oxidative and chemical degradation. This formulation approach provides low temperature fluidity characteristics exceeding that of many conventional mineral products and is a key benefit for remote, low ambient temperature applications. Mobil SHC 600 Series oils offer the following features and potential benefits:

FeaturesAdvantages and Potential Benefits
Superb high temperature thermal/oxidation resistanceHelps extend equipment high temperature operating capability
Long oil life, helps reduce maintenance costs
Helps minimize deposits to enable trouble-free operation and long filter life
High Viscosity Index and absence of waxMaintains viscosity and film thickness at high temperatures
Helps enable exceptional low temperature performance, including start-up
Low traction coefficientHelps reduce friction and increase efficiency in sliding mechanisms such as gearing, with potential for reduced power consumption and lower steady-state operating temperatures.
Helps minimize the effects of micro slip in rolling contact bearings to potentially extend rolling-element life
High load carrying capabilityHelps protects equipment and extends life; helps minimize unexpected downtime and extends service periods
Balanced additive combinationProvides excellent performance in terms of rust and corrosion prevention, water separability, foam control and air release performance enabling problem-free operation in a wide range of industrial applications, and reduced operating costs

(*) Energy efficiency relates solely to the performance of Mobil SHC 600 when compared to conventional (mineral) reference oils of the same viscosity grade in circulating and gear applications. The technology used allows up to 3.6% efficiency compared to the reference when tested in a worm gearbox under controlled conditions. Efficiency improvements will vary based on operating conditions and application.

While Mobil SHC 600 Series are generally compatible with mineral oil based products, admixture may detract from their performance. Consequently it is recommended that before changing a system to one of Mobil SHC 600 Series products, it should be thoroughly cleaned out and flushed to achieve the maximum performance benefits. Mobil SHC 600 Series oils are compatible with most NBR, FKM and most other elastomeric seal materials that are used with mineral oils. There is the potential for substantial variations in the elastomers. For best results, consult your equipment supplier, seal manufacturer, or your local company representative to verify compatibility.

Mobil SHC 600 Series lubricants are recommended for use in a wide variety of gear and bearing applications where high or low temperatures are encountered or where operating temperatures or bulk oil temperatures are such that conventional lubricants give unsatisfactory life, or where improved efficiency is desired. They are particularly effective in applications where the maintenance costs of component replacement, system cleaning and lubricant changes are high. Specific applications require selection of the appropriate viscosity grade and include:

  • Filled for life gearboxes, especially high ratio/ low-efficiency worm gears
  • Remotely located gearboxes, where oil change-out is difficult
  • Low temperature applications, such as ski lifts where seasonal oil changes can be avoided
  • Mixer roll bearings and roll neck bearings where high temperatures are encountered
  • Plastic calendars
  • Severe centrifuge applications, including marine centrifuges
  • Railroad A/C Traction Drives
  • Mobil SHC 626, 627, 629 and 630 are suitable for Oil Flooded Rotary Screw Compressors compressing natural gas, field gas gathering, CO2 and other process gasses used in the natural gas industry
  • Mobil SHC 629, 630, 632, 634, 636, and 639 are approved by Siemens AG for use in Flender gearboxes

 

Mobil SHC 600 Series meets or exceeds the requirements of:
 
624625626627629630632634636639
AGMA 9005 E02XXXXXXXXXX
DIN 51517-3 CLP   XXXXXXX
ISO 12925-1 CKBX         
ISO 12925-1 CKD XXXXXXXXX

 

Mobil SHC 600 Series has the following builder approvals:624625626627629630632634636639
MAG IAS, LLC  P-63
P-80
P-76P-77P-39
P-74
P-59P-35
P-39
P-34P-78
SIEMENS AG Flender gear units, T 7300, Table A-c, Flender Code No.    A36A35A34A33A32A31
SEW Eurodrive:
SEW IG CLP HC
SEW SG CLP HC
32
32
 68
68
 150
150
220
220
320460
460
6801000

 

Mobil SHC 600 Series626629630632634
ISO Viscosity Grade68150220320460
Viscosity, ASTM D 445      
cSt @ 40º C68150220320460
cSt @ 100º C11.621.128.538.550.7
Viscosity Index, ASTM D2270165166169172174
Pour Point, ºC, ASTM D5950-51-42-42-42-39
Flash Point, ºC, ASTM D 92225220220225228
Density @ 15°C (60°F) (g/cc)
ASTM D4052
0.860.860.870.870.87
Appearance, visualOrangeOrangeOrangeOrangeOrange
TOST, ASTM D 943 mod, hours10,000+10,000+10,000+10,000+10,000+
RPVOT, ASTM D 2722, minutes25002500250025002500
Rust protection, ASTM D665B, Synthetic Sea WaterPassPassPassPassPass
Water Separability, ASTM
D1401,Min. to 37 ml water @ 54º C
15----
Water Separability, ASTM
D1401,Min. to 37 ml water @ 82º C
-20202020
Copper Corrosion, ASTM D130,
24 hrs @ 121º C 
1B1B1B1B1B
Foam Test, ASTM D892, Seq I,II,IIITendency / Stability, ml/ml10/0, 20/0,
10/0
0/0, 0/0,0/00/0,
10/0,
0/0
0/0,0/0,0/00/0,0/0,0/0
FZG gear scuffing test, A/8.3/90,
ISO 14635-1 (mod),
Failure Stage
121313+13+13+
FAG FE8 Bearing Wear Test
7.5/80-80
((DIN 51819-3)
Roller Wear (mg)
-2222