Industrial Bitumen OX

ExxonMobil asphalt , France

OXIDISED BITUMEN PRODUCT

Product description

Industrial Bitumen OX products are derived from specially selected crude oils via carefully controlled refining processes.

The quality of ExxonMobil products is assured for every delivery. They are produced and controlled according to the ExxonMobil Global Product Integrity Management System, EN ISO 9000 or equivalent standard.

 

Applications

Users should conduct appropriate testing before use of Industrial Bitumen OX grades for specific applications.

 

Properties and Specifications

 Industrial Bitumen OX grades meet the following specification requirements:

PropertyUnitTest MethodINDUSTRIAL BITUMEN OX 85/25INDUSTRIAL BITUMEN OX 95/40
Softening point in glycerol°CEN 142780/9090/100
Penetration at 25°C0.1 mmEN 142620/3035/45
Flash point (COC) (min)°CEN ISO 2592250250
Solubility in toluene (min)% (m/m)EN 125929999
Specific gravity at 25°C EN 153261.00/1.101.00/1.10
Loss on heating at 163°C (max)% (m/m)EN 133030.50.5

Above specifications may be subject to change.

 

Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.

05-2020

Further Information

ExxonMobil supplies a full range of bitumen, waxes, white oils, process oils and a full range of other lubricants, fuels and chemical products worldwide. Please contact your local ExxonMobil representative, or contact us at www.exxonmobil.com for more information on other products.

Every care has been taken in the preparation of this information. To the extent permitted by applicable law, all warranties and/or representations, express or implied, as to the accuracy of the information are disclaimed, and no liability is accepted for the accuracy or completeness of the same.