Paving Bitumen 80/100 AF
ExxonMobil Asphalt , Morocco
Paving Bitumen 80/100 AF is a penetration graded bitumen product derived from specially selected crude oils via carefully controlled refining processes.
The quality of ExxonMobil products is assured for every delivery. They are produced and controlled according to the ExxonMobil Global Product Integrity Management System, EN ISO 9000 or equivalent standard.
Paving Bitumen 80/100 AF grade is recommended for road construction. If other applications are considered, then users should conduct appropriate testing before use.
Properties & Specifications
Paving Bitumen 80/100 AF grade meets the following specification requirements:
|Paving Bitumen grade|
|Property||Unit||Test Method||80/100 AF|
|Penetration at 25°C||x 0.1 mm||EN 1426||80-100|
|Softening point||°C||EN 1427||43-51|
|Flash point (min)||°C||ISO 2592||230|
|Solubility in toluene (min)||% (m/m)||EN 12592||99.0|
Resistance to hardening: Rolling Thin Film Oven Test at 163 °C (EN 12607-1)
- change of mass (max) +/-
- retained penetration (min)
- increase in softening point (max)
Above specifications may be subject to change.
Health & Safety
Detailed health and safety information for this product is provided in the Material Safety Data Sheet (MSDS), available upon request through your local sales representative or from www.ExxonMobil.com.
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.05-2020