Prowax 512

ExxonMobil specialties , Australia

Product Description

Prowax 512 is a low-range melting point product in the Prowax line of petroleum slack and scale waxes. It is a translucent crystalline material in the solid state and a straw yellow-to-amber, clear liquid when molten. It is derived from petroleum via a carefully controlled refining process. Prowax 512 is comprised of a mixture of straight chain normal paraffin and branched, iso-paraffin hydrocarbons.

 

ExxonMobil waxes are produced and controlled according to the ExxonMobil Product Quality Management System, EN ISO 9000 or equivalent standard.

 

Applications

Prowax 512 can be used in the following applications subject to applicable laws and regulations in each jurisdiction*:

     •  Candle wax blends

     •  Wax emulsions

     •  Wax blends

 

* User must check compliance with applicable regulations

 

Properties and Specifications

Property

Standard Method(a)

Typical

Min

Max

ASTM Color by Auto Tristimulus

ASTM D6045

1.0

Density @ 15 C, kg/m3

ASTM D1298

820

Flash Point, Cleveland Open Cup, °C

ASTM D92

204

Kinematic Viscosity @ 100 C, mm2/s

ASTM D445

3.7

3.5

4.5

Melting Point, °C

ASTM D87

53

51.0

56.0

Needle Penetration, 25 C, 0.1 mm

ASTM D1321

53

Oil Content, wt%

ASTM D721

7

10.0

n-paraffin content, report in %

ASTM D5442

60

Note 1: Products are certified on release to meet the values specified. Actual values may deviate within the established reproducibility of the test method specified.

Note 2: For purpose of determining conformance with specification, observed or calculated values shall be rounded off to the nearest unit in the last significant digit used in expressing the limiting value in accordance to the ASTM E 29 method

(a) In lieu of standard test method, alternate test methods may be used for the certification of a product property.

(b) Density at 15°C is based on measurement of the wax liquid density at a higher temperature corrected to 15°C using ASTM D1250 Table B.

 

Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.

01-2020

Mobil Oil Australia Pty Ltd
A.B.N. 88 004 052 984
12 Riverside Quay
Southbank Vic 3006

+61 3 8633 8444
http://www.exxonmobil.com

Due to continual product research and development, the information contained herein is subject to change without notification. Typical Properties may vary slightly.  This product data sheet is based on global product data sheets for use with products purchased in the U.S.