Paving Asphalt 80100

ExxonMobil Asphalt, Singapore

PENETRATION GRADED ASPHALT PRODUCT

Product Description

Paving Asphalt 80/100 is a penetration graded asphalt product derived from specially selected crude oils via carefully controlled refining processes.

The quality of ExxonMobil products is assured for every delivery. They are produced and controlled according to the ExxonMobil Product Quality Management System, EN ISO 9000 or equivalent standard.

 

Applications

Paving Asphalt 80/100 is recommended for road construction. If other applications are considered, then users should conduct appropriate testing before use.

 

Properties & Specifications

Paving Asphalt 80/100 meets the following specification requirements:

AsphaltUnitsMethod80/100
Penetration at 25° C Note 10.1 mmASTM D 580-100
Softening Point Note 2°CASTM D 3645-52
Ductility at 25° C, 5 cm/min (min) Note 2cmASTM D 113150
Ductility at 15° C, 5 cm/min (min) Note 2cmASTM D 113100
Wax Content (max) Note 2mass %DIN EN 12606-12
Specific gravity Note 2-ASTM D 701.01-1.05
Flash Point (min) Note 1°C ASTM D 92232
Solubility in trichloroethylene (min) Note 1mass %ASTM D 204299.5
Viscosity at 60° C (AI 100 bulb C) (min) Note 3Pa.sASTM D 2171115
Viscosity at 135° C Note 3mm2/sASTM D2170300 - 650

 

Loss on heating at 163°C  (ASTM D6)

Change of mass (max) +/-*Note2 wt %ASTM D 60.2
Retained penetration (min) Note 2   %ASTM D 580

 

Thin Film Oven Test at 163°C (ASTM D1754)

Change of mass (max) +/- *Note2mass %ASTM D 17540.2
Retained penetration (min) Note 2   %ASTM D 560
Ductility at 25° C, 5 cm/min (min) Note 2   cmASTM D 113150

 

Rolling Thin Film Oven Test at 163°C (ASTM D2872)

Penetration at 25° C  as % of original (min) *Note3%ASTM D 550
Ductility at 25° C, 5 cm/min (min) Note 3cmASTM D 11360

    Note 1: Applies to all customers

    Note 2: Applies to all customers except in New Zealand

    Note 3: Applies to product supplied to customers in New Zealand only

Above specifications may be subject to change

 

Health & Safety

Detailed heath and safety information for this product is provided in the Material Safety Data Sheet (MSDS), available upon request through your local sales representative or from www.ExxonMobil.com

All trademarks used herein are trademarks of Exxon Mobil Corporation or one of its subsidiaries.


10-2019

Further Information

ExxonMobil supplies a full range of bitumen, waxes, white oils, process oils and a full range of other lubricants, fuels and chemical products worldwide. Please contact your local ExxonMobil representative, or contact us at www.exxonmobil.com for more information on other products.

Every care has been taken in the preparation of this information. To the extent permitted by applicable law, all warranties and/or representations, express or implied, as to the accuracy of the information are disclaimed, and no liability is accepted for the accuracy or completeness of the same.