Cutback Asphalt MC 70 TIS
ExxonMobil Asphalt, Thailand
PETROLEUM CUTBACK ASPHALT PRODUCT
Cutback Asphalt MC 70 TIS, is a product formulated with petroleum based solvents. The base asphalt is derived from specially selected crude oils via carefully controlled refining processes.
The quality of ExxonMobil products is assured for every delivery. They are produced and controlled according to the ExxonMobil Product Quality Management System, EN ISO 9000 or equivalent standard.
Cutback Asphalt MC 70 TIS is recommended for road construction. If other applications are considered, then users should conduct appropriate testing before use.
Properties & Specifications
Cutback Asphalt MC 70 TIS meets TIS 865-2544 specification requirements:
|Cutback Asphalt||Units||Method||MC 70 TIS|
|General requirements||No sedimentation and stratification of this material can be visually observed|
|Kinematic Viscosity at 60° C||cSt||ASTM D 2170||70-140|
|Flash Point TOC (min)||°C||ASTM D 3143||38|
|Spot test||-||AASHTO T 102-83||negative|
|Water content (max)||vol %||ASTM D 95||0.2|
Distillate Test (ASTM D402)
|Distillate, % vol. of total distillate to 360° C|
|- to 225° C (max)||% (v/v)||ASTM D 402||20|
|- to 260° C||% (v/v)||ASTM D 402||20-60|
|- to 315° C||% (v/v)||ASTM D 402||65-90|
|Residue from distillation to 360° C, volume % by difference (min)||% (v/v)||ASTM D 402||55|
Test on Residue from Distillation (ASTM D402)
|Ductility at 25° C, 5 cm/min (min)||cm||ASTM D 113||100|
|Penetration at 25° C, 100g, 5 sec||0.1 mm||ASTM D 5||120-250|
|Solubility in trichloroethylene (min)||wt %||ASTM D 2042||99|
TIS 865-2544 specifications may be subject to change.
Health & Safety
Detailed heath and safety information for this product is provided in the Material Safety Data Sheet (MSDS), available upon request through your local sales representative or from www.exxonmobil.com.
All trademarks used herein are trademarks of Exxon Mobil Corporation or one of its subsidiaries