Mobil Super Synthetic Euro 5W40

Mobil Passenger Vehicle Lube, Canada

Synthetic

Product Description

Mobil Super™ Synthetic Euro is a full synthetic high-performance motor oil, which provides excellent high temperature protection even under severe operating conditions. Mobil Super Synthetic Euro is designed to help provide long engine life and outstanding protection in vehicles of all ages. This oil provides outstanding protection against sludge, engine rust and corrosion under severe and low-temperature operating conditions and provides excellent viscosity and fluidity across a broad range of temperatures.

Mobil Super Synthetic Euro is available in one multi-viscosity grade: SAE 5W-40. Mobil Super Synthetic Euro 5W-40 is classified by The American Petroleum Institute (API) as API SN. This claim is backward compatible with earlier performance levels such as API SM, SL, and SJ.

 

Features and Benefits

•Helps extend engine life

•Outstanding wear protection for vehicles of all ages

•Excellent high temperature protection to help keep engines cool

•Helps extended operation at elevated temperatures (up to 200ºC) without oxidative oil thickening and oil breakdown

•Helps control oil consumption and loss

•Allows easy starting and rapid oil circulation during cold starts to protect critical engine parts

•Specifically formulated to support European designed engines

•Guaranteed protection with Mobil Super Limited Warranty*

•API SN

 *Some restrictions apply. See the guarantee for terms and conditions

 

Applications

Mobil Super Synthetic Euro 5W-40 is recommended for vehicles requiring a European spec. Before using Mobil Super Synthetic motor oils, consult the owner's manual of the vehicle for the manufacturer's recommended viscosity grade and API Service Classification.

 

Specifications and Approvals

This product has the following approvals:

BMW Longlife 01

MB-Approval 229.3

MB-Approval 229.5

Porsche A40

VW 502 00

VW 505 00

 

This product meets or exceeds the requirements of:

API SN

 

Properties and Specifications

Property

Grade

SAE 5W-40

Density @ 15 C, g/ml, ASTM D4052

0.853

Flash Point, Cleveland Open Cup, °C, ASTM D92

238

Kinematic Viscosity @ 100 C, mm2/s, ASTM D445

13

Kinematic Viscosity @ 40 C, mm2/s, ASTM D445

70

Pour Point, °C, ASTM D97

-39

 

Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.


01-2020

Imperial Oil

Petroleum and Chemicals Division
Lubricants and Specialties
240 Fourth Ave SW
C. P. 2480, Station M
Calgary AB T2P 3 M 9

1-800-268-3183

Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification. Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations. The information contained herein is subject to change without notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit www.exxonmobil.com
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities.