Mobil Delvac 1™ SHC synthetic diesel engine oil

View all products in High speed engine oils

Related product

Mobil Delvac 1™ ESP heavy-duty diesel engine oil

Mobil Delvac 1™ ESP 5W-40 fully synthetic diesel engine oil provides exceptional wear protection in the most severe operating environments.

Learn more
Contact an expert

Product information

   Mobil Delvac 1 SHC 5W-40 performance profile 672.888 KB/pdf
Download Share

Technical resources

Storage and handling: Best practices and guidelines for marine lubricants

Learn more about best practices for handling, storing and dispending ExxonMobil marine lubricants.

Switching to Mobil Delvac 1™ 5W-40 helped increase oil change intervals by a factor of eight

By implementing Mobil Serv℠ Lubricant Analysis and switching auxiliary engine over to Mobil Delvac 1™ 5W-40, Reederei Eicke was able to increase its engine oil change interval.

Features and Benefits

Modern high output diesel engines run hotter than older engines which significantly increases the demands on engine lubricants. Current tighter engine designs reduce oil consumption, resulting in less fresh oil makeup to replenish depleted additives. Top piston rings are located higher bringing the oil film closer to the combustion chamber where temperatures increase thermal stress on the lubricant. Mobil Delvac 1 SHC 5W-40 helps to protect the engine under severe operating conditions. It is also fully compatible with conventional mineral oils. The key benefits include:
Features
Advantages and Potential Benefits
Excellent thermal and oxidation stability Control of low temperature sludge build-up and high temperature varnish deposits
High TBN Helps towards extended drain intervals with high sulphur fuels
Advanced formulation and viscometrics Maintains viscosity in severe, high temperature service
Excellent low temperature pumpability Easier engine start-up and reduced wear
Good resistance to corrosion Helps towards long life of critical wear surfaces
Long drain capability Helps towards good operating efficiency and lower overall cost
Component compatibility Long gasket and seal life, extended service intervals
Low volatility, excellent wear and bore polishing control Good oil consumption control

Applications

  • Mobil Delvac 1 SHC 5W-40 is recommended for use in super high performance diesel applications including turbo-charged and naturally aspirated engines designs
  • These applications include: on-highway engines operating in both high speed/high load and short haul pick-up/delivery; off-highway and marine engines operating in severe low speed/heavy load conditions
  • Diesel powered equipment from European builders

Specifications and Approvals

Mobil Delvac 1 SHC 5W-40 meets or exceeds the requirements of:
ACEA E4 X
Mobil Delvac 1 SHC 5W-40 has the following builder approvals:
MB-Approval 228.5 X
MAN M 3277 X
MTU Oil Category 3 X
Mobil Delvac 1 SHC 5W-40 is recommended by ExxonMobil for use in applications requiring:
API CE/CF X
Volvo VDS-2 X

Typical Properties

Mobil Delvac 1 SHC
SAE Grade 5W-40
Viscosity, ASTM D 445

cSt @ 40ºC 84
cSt @ 100ºC 14.2
Viscosity Index, ASTM D 2270 176
Sulphated Ash, wt%, ASTM D 874 1.9
Total Base #, mg KOH/g, ASTM D 2896 16
Pour Point, ºC, ASTM D 97 -45
Flash Point, ºC, ASTM D 92 238
Density @ 15ºC kg/l, ASTM D 4052 0.859
  • Inland and Coastal
  • Extended Life
  • Enhanced Wear Protection
  • Low Temperature
  • Synthetic
  • Ship in the river during a sunset

    AEP River Operations cut oil use and reduce waste by using Mobil Delvac 1™ ESP 5W-40 synthetic lubricants

    By switching to Mobil Delvac 1™ ESP 5W-40 and using Mobil Serv℠ Lubricant Analysis, it’s able to extend oil change intervals and decrease oil usage and waste management.

    Learn more
  • Marine lubricants pernis drums

    Synthetic marine lubricants

    ExxonMobil synthetic marine lubricants offer superior protection and performance along with longer oil and equipment life.

    Learn more
  • Cargo shipping port at night

    Ports directory

    Use the lubricants ports and services directory to view our offer.

    Learn more
  • Signum Marine Fuels and Lubricant Analysis engineer testing lubricant

    Mobil Serv℠ Lubricant Analysis

    This state-of- the-art programme helps you prolong engine life, avoid unscheduled downtime and maintain equipment reliability.

    View service
Loading