Waxrex 1280  

ExxonMobil Specialties, United States

Product Description

Waxrex 1280 is a lower-range melting point semi-refined paraffin wax. It is derived from petroleum via a carefully controlled refining process to provide low color and controlled oil content. Waxrex 1280 meets the requirements for most industrial wax applications and Food and Drug Administration (FDA) standards for indirect food contact substances. Waxrex 1280 is a translucent crystalline material in the solid state and is water-white in color and low in viscosity when molten. It is composed mainly of normal, straight chain paraffin hydrocarbons that impart properties of water repellency.
Waxrex 1280 contains an oxidation inhibitor to enhance the natural resistance to oxidation.
ExxonMobil waxes are produced and controlled according to the ExxonMobil Product Quality Management System, EN ISO 9000 or equivalent standard.

 

Applications

Waxrex 1280 is primarily used as a component in the manufacture of candles subject to applicable laws and regulations in each jurisdiction*.
* User must check compliance with applicable regulations.

 

Properties and Specifications

“Waxrex 1280 meets the applicable U.S. Food and Drug Administration (FDA) requirements for use as a components of nonfood articles in contact with food, as detailed in 21 CFR 178.3710 (a) through (f), including the UV absorbance requirements.”

PropertyStandard Method(a)TypicalMinMax
Melting Point, ºC (ºF)ASTM D 87 51.6 (124.9)53.6 (128.5)
Oil Content, wt %ASTM D 721  57
Color, SayboltASTM D 6045 28 
Odor, coldASTM D 1833  1
Kinematic Viscosity @ 100ºC, mm²/s (cSt)ASTM D 4454.2  
Density, @ 15ºC (59ºF), kg/m³(b)ASTM D 1298817  
Flash Point COC, ºC (ºF)ASTM D 92 204(400) 

(a) In lieu of standard test method, alternate test methods may be used for the certification of a product property.
(b) Density at 15°C is based on measurement of the wax liquid density at a higher temperature corrected to 15°C using ASTM D1250 Table B.

Note 1: Products are certified on release to meet the values specified. Actual values may deviate within the established reproducibility of the test method specified.
Note 2: For purpose of determining conformance with specification, observed or calculated values shall be rounded off to the nearest unit in the last significant digit used in expressing the limiting value in accordance to the ASTM E 29 method

 

Health and Safety

Detailed health and safety information for this product is provided in the Material Safety Data Sheet (MSDS), available upon request through your local sales representative or from www.ExxonMobil.com

 

Further Information

ExxonMobil supplies a full range of waxes, white oils, process oils, asphalt and a full range of lubricants, fuels and chemical products worldwide. Please contact your local ExxonMobil representative, or contact us at www.ExxonMobil.com, for more information on other products.

The ExxonMobil logotype (and any other trademarks) are trademarks of Exxon Mobil Corporation or one of its subsidiaries

07-2016

Exxon Mobil Corporation
22777 Springwoods Village Parkway
Spring TX 77389
 


+1 703 846 3000
http://www.exxonmobil.com

Every care has been taken in the preparation of this information. To the extent permitted by applicable law, all warranties and/or representations, express or implied, as to the accuracy of the information are disclaimed, and no liability is accepted for the accuracy or completeness of the same.

Loading