Paving Bitumen CH
ExxonMobil asphalt , Switzerland
PENETRATION GRADED BITUMEN PRODUCTS
Paving Bitumen CH are penetration graded bitumen products derived from specially selected crude oils via carefully controlled refining processes.
The quality of ExxonMobil products is assured for every delivery. They are produced and controlled according to the ExxonMobil Global Product Integrity Management System, EN ISO 9000 or equivalent standard.
Paving Bitumen CH grades are recommended for road construction. If other applications are considered, then users should conduct appropriate testing before use.
Properties & Specifications
Paving Bitumen CH grades meet the SN 670 202-NA / EN 12591:2009 specification requirements:
|Paving Bitumen grades||50/70 CH||70/100 CH||160/220 CH|
|Penetration at 25 °C||x 0.1 mm||EN 1426||50-70||70-100||160-220|
|Softening point||°C||EN 1427||46-54||43-51||35-43|
|Flash point (min)||°C||ISO 2592||230||230||220|
|Solubility in toluene (min)||% (m/m)||EN 12592||99.0||99.0||99.0|
|Dynamic viscosity at 60 °C (min)||Pa.s||EN 12596||145||90||30|
|Kinematic viscosity at 135 °C (min)||mm2/s||EN 12595||295||230||135|
|Fraass breaking point (max)||°C||EN 12593||-8||-10||-15|
|Pfeiffer Penetration Index||-||Annex A|
Resistance to hardening: Rolling Thin Film Oven Tests at 163 °C (EN 12607-1)
|Change of mass (max) +/-||%||EN 12607-1||0.5||0.8||1.0|
|Retained penetration (min)||%||EN 1426||50||46||37|
|Increase in softening point – Severity 1 (max)||°C||EN 1427||9||9||11|
The SN 670 202-NA / EN 12591 specifications may be subject to change.
Health & Safety
Detailed health and safety information for these products is provided in the Material Safety Data Sheets (MSDS), available upon request through your local sales representative or from www.ExxonMobil.com.
All trademarks used herein are trademarks of Exxon Mobil Corporation or one of its subsidiaries.05-2020