Flexxipave 25/55-55 PLUS+
ExxonMobil asphalt , Germany
POLYMER MODIFIED BITUMEN PRODUCT
Flexxipave 25/55-55 PLUS+ is a polymer modified graded bitumen product derived from specially selected crude oils via carefully controlled refining processes. Flexxipave 25/55-55 PLUS+ has heightened polymer content versus our product Flexxipave 353 E.
The quality of ExxonMobil products is assured for every delivery. They are produced and controlled according to the ExxonMobil Product Quality Management System, EN ISO 9000 or equivalent standard.
Flexxipave 25/55-55 PLUS+ is recommended for road construction. If other applications are considered, then users should conduct appropriate testing before use.
Properties & Specifications
Flexxipave 25/55-55 PLUS+ grade meet the DIN EN 14023:2010 specification requirements:
|Polymer modified bitumen grade||Flexxipave 25/55-55 PLUS+|
|Penetration at 25 °C||x 0.1 mm||EN 1426||25-55|
|Softening point (min)||°C||EN 1427||55|
|Flash point (min)||°C||EN ISO 2592||235|
|Cohesion – Force ductility at 10 °C (min)||J/cm2||EN 13589|
|Fraass breaking point (max)||°C||EN 12593||-10|
|Elastic recovery at 25 °C (min)||%||EN 13398||50|
|Storage stability, difference in softening point (max)||°C||EN 13399||5|
Resistance to hardening: Rolling Thin Film Oven Test at 163 °C (DIN EN 12607-1)
|- change of mass (max) +/-||%||EN 12607-1||0.5|
|- retained penetration (min)||%||EN 1426||60|
|- increase in softening point (max)|
- decrease in softening point (max)
|- elastic recovery at 25 °C (min)||%||EN 13398||50|
The DIN EN 14023 specification may be subject to change.
Health & Safety
Detailed health and safety information for this product is provided in the Material Safety Data Sheet (MSDS), available upon request through your local sales representative or from www.ExxonMobil.com.
All trademarks used herein are trademarks of Exxon Mobil Corporation or one of its subsidiaries.05-2020