Paving Bitumen 160/220 H

ExxonMobil asphalt , France


Product Description

Paving Bitumen 160/220 H is a penetration graded bitumen product derived from specially selected crude oils via carefully controlled refining processes.

The quality of ExxonMobil products is assured for every delivery. They are produced and controlled according to the ExxonMobil Global Product Integrity Management System, EN ISO 9000 or equivalent standard.


Paving Bitumen 160/220 H grade is recommended for road construction. If other applications are considered, then users should conduct appropriate testing before use.


Properties & Specifications

Paving Bitumen 160/220 H grade meets the NF EN 12591:2009 specification requirements:

Paving Bitumen grade  160/220 H
PropertyUnitTest Method 
Penetration at 25°Cx 0.1 mmEN 1426160-220
Softening point°CEN 142735-43
Flash point (min)°CISO 2592220
Solubility in toluene (min)% (m/m)EN 1259299.0

Resistance to hardening: Rolling Thin Oven Test at 163 °C (EN 12607-1)

Change of mass (max) +/-%EN 12607-11.0
Retained penetration (min)%EN 142637
Increase in softening point – Severity 1 (max)°CEN 142711

The NF EN 12591 specifications may be subject to change.


Health & Safety

Detailed health and safety information for this product is provided in the Material Safety Data Sheet (MSDS), available upon request through your local sales representative or from

All trademarks used herein are trademarks of Exxon Mobil Corporation or one of its subsidiaries.


Further Information

ExxonMobil supplies a full range of bitumen, waxes, white oils, process oils and a full range of other lubricants, fuels and chemical products worldwide. Please contact your local ExxonMobil representative, or contact us at for more information on other products.

Every care has been taken in the preparation of this information. To the extent permitted by applicable law, all warranties and/or representations, express or implied, as to the accuracy of the information are disclaimed, and no liability is accepted for the accuracy or completeness of the same.