MOBILMET™ 560 SERIES
ExxonMobil industrial , India
Product Description
Mobilmet™ 560 Series are high performance neat cutting oils. They are intended for severe cutting operations especially on difficult to machine steels. Mobilmet 560 Series oils are not recommended for use with copper, aluminium and their alloys due to its aggressiveness towards these metals. Mobilmet 560 Series oils have demonstrated good surface finish, extended tool life and control of built-up edge.
Features and Benefits
Salient features and potential benefits of Mobilmet 560 products include :
|
Features |
Advantages and Potential Benefits |
|
Good machining performance |
Increased production resulting from longer tool life and reduced downtime for tool changes |
|
|
Improved surface finish, closer tolerances and reduced formation of built-up edge resulting in fewer rejects |
|
Good lubricity |
Cooler work pieces and increased feed rates possible for reduced operating costs |
|
Broad multi-purpose capability |
Suitability for a wide range of severe machining operations on difficult steels |
Applications
Mobilmet 560 Series are recommended for severe cutting operations on normal and difficult to machine steels. Specific applications, by grade, include:
• Mobilmet 562 is particularly recommended for drilling and deep hole drilling (less than 20 mm diameter). It is also suitable for grinding, parting-off and automatic lathe operations on small work pieces, based on application conditions.
• Mobilmet 563 is recommended for broaching application. It is also suitable for deep hole drilling (greater than 20 mm diameter), tapping, threading and gear shaping, parting-off and automatic lathe operations, based on application conditions.
Properties and Specifications
|
Property |
MOBILMET 562 |
MOBILMET 563 |
|
Grade |
|
N/A |
|
Chlorine, % mass, Internal Method |
Present |
Present |
|
Copper Strip Corrosion, 3 h, 100 C, Rating, ASTM D130 |
4C |
4C |
|
Flash Point, Cleveland Open Cup, °C, ASTM D92 |
152 |
176 |
|
Kinematic Viscosity 40 C, mm2/s, ASTM D7042 |
10.7 |
18.2 |
|
Pour Point, °C, ASTM D97 |
-15 |
-15 |
|
Sulfur, mass%, ASTM D4294 |
Present |
Present |
Health and Safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspxAll trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
12-2025