Mobilgard™ ADL Series

ExxonMobil marine , India

Diesel Engine Oils
Energy Efficiency logoPrimetals logo

Product Description

Mobilgard™ ADL Series oils have been designed for high Brake Mean Effective Pressure (BMEP) medium- and high-speed diesel engines operating on distillate fuels.

 

Mobilgard™ ADL 30 and Mobilgard™ ADL 40 oils each have a balanced formulation which combats lacquer formation and deposits in severe service applications. Superior load carrying properties help to minimise piston ring and liner wear, and also make the lubricants suitable for marine gearing applications.

 

Potential benefits of using Mobilgard ADL Series lubricants include helping:

 

• Extend component and critical wear surface life

• Improve overall engine cleanliness

• Reduce oil consumption

• Increase time between engine overhauls 

 

Features and Benefits

Mobilgard ADL Series oils have demonstrated superior performance in the latest model diesel engines, including engines of MAN Energy Solutions Augsburg, Caterpillar (3600 and C280 Series), Deutz, and Wärtsilä. In extensive field testing on these engines, Mobilgard ADL Series oils corrected many problems normally associated with severe service engines operating on lower quality fuels. Results included dramatically reduced oil consumption, significantly reduced liner lacquering and extended periods between overhauls. These advanced diesel lubricants possess excellent water separation, rust and corrosion resistance properties.

 

Key features and potential benefits include:

 

Features

Advantages and Potential Benefits

Increased thermal and oxidation stability

Improved engine cleanliness, reduced liner lacquering, reduced top deck sludge, reduced piston ring groove deposits and bore polishing

Superior wear protection

Extends the life of critical wear surfaces

Enhanced detergency/dispersancy capability

Reduced deposits especially in the ring belt area which leads to extended cylinder overhauls and reduced oil consumption

Stay-in-grade shear stability

Reduced oil consumption and improved bearing protection

High TBN levels

Prevents corrosive wear due to higher sulphur fuels

Broad range of engine applications

One severe service engine lubricant for all shipboard applications

 

Applications

Mobilgard ADL Series lubricants are intended for use in high BMEP engines and in severe duty engine applications where the nature of the fuel and service requires a greater level of detergency/dispersancy and liner lacquer control than is offered by most diesel engine lubricants.

 

Specifications and Approvals

 

This product has the following approvals:

ADL 30

ADL 40

Anglo Belgian Corporation 12V-DZ, 16V-DZ (Dual Fuel – gas mode)

 

X

Anglo Belgian Corporation 6DZ, 8DZ (Dual Fuel – gas mode)

X

 

Caterpillar / MaK 4-Stroke Medium Speed Diesel Engine (Distillate Operation)

 

X

GE Transportation GE16V250 Fundamental Approval (letter on file)

 

X

MAN Energy Solutions Augsburg (Heritage MAN B&W) 28/33D engines

 

X

MAN Energy Solutions Augsburg (Heritage MAN B&W) 4 Stroke medium speed engines for Alternating Distillate / LNG operation

X

X

MTU Oil Category 2

X

X

Ortlinghaus-Werke GmbH ON 9.2.10

X

 

Wartsila 4-Stroke Medium Speed Engines for Distillate- and Dual-Fuel operations

 

X

Wartsila Medium Speed Diesel Engine

X

X

ZF TE-ML 04B

X

X

 

This product is recommended for use in applications requiring:

ADL 30

ADL 40

ACEA E2

X

X

Allison C-4

X

 

API CF

X

X

API SF

X

X

MAN 270

X

X

 

This product meets or exceeds the requirements of:

ADL 30

ADL 40

Anglo Belgian Corporation 12V-DZ, 16V-DZ (with distillate fuel up to 1,5% Sulfur)

 

X

Anglo Belgian Corporation 6DZ, 8DZ (with distillate fuel up to 1,5% Sulfur)

X

 

 

Properties and Specifications

Property

ADL 30

ADL 40

Grade

SAE 30

SAE 40

Ash, Sulfated, mass%, ASTM D874

1.4

1.4

Flash Point, Cleveland Open Cup, °C, ASTM D92

230

239

Kinematic Viscosity @ 100 C, mm2/s, ASTM D445

11.5

14.7

Kinematic Viscosity @ 40 C, mm2/s, ASTM D445

90

132

Pour Point, °C, ASTM D97

-30

-21

Total Base Number, mgKOH/g, ASTM D2896

12

12

Viscosity Index, ASTM D2270

117

112

 

Health and Safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.

08-2023

ExxonMobil Marine Limited
Ermyn Way
Leatherhead, Surrey
United Kingdom KT22 8UX

http://www.exxonmobil.com

Due to continual product research and development, the information contained herein is subject to change without notification.  Typical Properties may vary slightly.