Mobilgard 560 VS

ExxonMobil marine , Malta

Diesel Engine Cylinder Oil

Product Description

Mobilgard™ 560 VS by ExxonMobil is a high performance, marine diesel engine cylinder oil designed for use in crosshead engines running heavy fuel with sulfur levels from 0.5-4%. This new cylinder lubricant technology provides maximum protection from adhesive and corrosive wear at the higher operating temperatures and pressures found in today's modern crosshead engines. The outstanding performance of Mobilgard 560 VS has been demonstrated at the highest peak firing pressures and liner temperatures.

 

Mobilgard 560 VS employs additives with greater thermal stability and acid-corrosion protection. It has an optimum viscosity of 20 cSt @ 100ºC and low volatility for optimal lubricant distribution and film retention. Through the use of patented technology, the oil's higher viscosity is attained without the use of thermally unstable, deposit-producing bright stock. Unique additive technology at the 60 TBN alkalinity level in Mobilgard 560 VS has demonstrated outstanding ring and liner protection and cleanliness under sustained operation with fuel sulphur levels below 1%.

 

Features and Benefits

Mobilgard 560 VS cylinder oil offers the following features and potential benefits:

 

Features

Advantages and Potential Benefits

Excellent thermal and oxidation stability

Helps reduce deposits and sludge formation

Clean engines reduce the lay-up time required for overhauls

Exceptional antiwear properties

Reduced liner and ring wear helps promote extended periods between overhauls

Excellent anti-scuffing control

Outstanding detergency capability

Excellent engine cleanliness increases combustion efficiency

Helps miminise deposit formation with use of low sulfur (<1%) fuels

High TBN level and retention

Effectively handles wide fuel sulfur range from 0.5-4.0% at 70 BN equivalent feed rates

Helps to maximize protection against the corrosive effects of high sulphur fuels

 

Applications

Mobilgard 560 VS has been developed for marine crosshead engines designed for increased power and fuel efficiency. Mobilgard 560 VS has also demonstrated excellent performance in earlier engine designs and during slow speed steaming operation.

 

Specifications and Approvals

This product meets or exceeds the requirements of:

MAN Energy Solutions Copenhagen (Heritage MAN B&W) 2-Stroke engines according to manufacturer's latest operating guidelines

Japan Engine Corporation (Heritage MHI) 2-Stroke engines according to manufacturer's latest operating guidelines

Winterthur Gas and Diesel Engine (Heritage Wartsila & Sulzer) 2-Stroke engines according to manufacturer's latest operating guidelines

 

Properties and Specifications

Property

Grade

SAE 50

Flash Point, Cleveland Open Cup, °C, ASTM D92

248

Kinematic Viscosity @ 100 C, mm2/s, ASTM D445

20

Kinematic Viscosity @ 40 C, mm2/s, ASTM D445

219

Pour Point, °C, ASTM D97

-20

Specific Gravity, 15 C/15 C, ASTM D4052

0.922

Total Base Number, mgKOH/g, ASTM D2896

60

Viscosity Index, ASTM D2270

105

 

Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.

05-2020

ExxonMobil Marine Limited
Ermyn Way
Leatherhead, Surrey
United Kingdom KT22 8UX

http://www.exxonmobil.com

Due to continual product research and development, the information contained herein is subject to change without notification.  Typical Properties may vary slightly.