ExxonMobil specialties , Russia
Waxrex 1270 is a lower-range melting point semi-refined paraffin wax. It is derived from petroleum via a carefully controlled refining process to provide low colour and low oil content. Waxrex 1270 meets the requirements for many industrial wax applications and also meets requirements of RAL for candle manufacture. Waxrex 1270 is a translucent crystalline material in the solid state and is water-white in colour and low in viscosity when molten. It is composed mainly of normal, straight chain paraffin hydrocarbons that impart properties of water repellency and resistance to most acids and alkalis.
Waxrex 1270 contains an oxidation inhibitor to enhance the natural resistance to oxidation.
ExxonMobil waxes are produced and controlled according to the ExxonMobil Product Quality Management System, EN ISO 9000 or equivalent standard.
Waxrex 1270 is primarily used as a component in the manufacture of candles subject to applicable laws and regulations in each jurisdiction*.
* User must check compliance with applicable regulations
Properties and Specifications
Waxrex 1270 meets the requirements of RAL-GZ 041 for candle manufacture.
|Melting Point, °C (°F)||ASTM D 87||52.0(125.6)||57.0(134.6)|
|Oil Content, wt %||ASTM D 721||2.5|
|Colour, Saybolt||ASTM D 6045||+25|
|Odour, cold||ASTM D1833||1|
|Penetration @ 25°C (77°F), needle, 0.1mm||ASTM D 1321||55|
|Kinematic Viscosity @ 100°C, mm²/s (cSt)||ASTM D 445||3.7|
|Density, @ 15°C (59°F), kg/m³(b)||ASTM D 1298||819|
|Flash Point COC, °C (°F)||ASTM D 92||200(392)|
(a) In lieu of standard test method, alternate test methods may be used for the certification of a product property.
(b) Density at 15°C is based on measurement of the wax liquid density at a higher temperature corrected to 15°C using ASTM D1250 Table B.
Note 1: Products are certified on release to meet the values specified. Actual values may deviate within the established reproducibility of the test method specified.
Note 2: For purpose of determining conformance with specification, observed or calculated values shall be rounded off to the nearest unit in the last significant digit used in expressing the limiting value in accordance to the ASTM E 29 method
Health and Safety
Detailed health and safety information for this product is provided in the Material Safety Data Sheet (MSDS), available upon request through your local sales representative or from www.ExxonMobil.com
ExxonMobil supplies a full range of waxes, wax emulsions, white oils, process oils, bitumen and a full range of lubricants, fuels and chemical products worldwide. Please contact your local ExxonMobil representative, or contact us at www.ExxonMobil.com, for more information on other products.
The Mobil logotype, the Pegasus design are trademarks of Exxon Mobil Corporation, or one of its subsidiaries.05-2020