Paving Asphalt 170

ExxonMobil asphalt , Singapore


Product Description

Paving Asphalt 170 is a viscosity graded asphalt product derived from specially selected crude oils via carefully controlled refining processes.

The quality of ExxonMobil products is assured for every delivery. They are produced and controlled according to the ExxonMobil Product Quality Management System, EN ISO 9000 or equivalent standard.



Paving Asphalt 170 is recommended for road construction. If other applications are considered, then users should conduct appropriate testing before use.


Properties & Specifications

Paving Asphalt 170 meets the following specification requirements:

PropertiesUnitsMethodPaving Asphalt 170
Viscosity at 60° C Pa.sASTM D 2171140 - 180
Viscosity at 135° CPa.sASTM D 21710.25 - 0.45
Penetration at 25° C (min)x 0.1 mmASTM D 562
Flash Point (min)°CASTM D 92250
Solubility in trichloroethylene (min)wt %ASTM D 204299
Density at 15° Ckg / m3ASTM D 70Report


Rolling Thin Film Oven Test at 163° C (ASTM D 2872)

Viscosity of residue at 60° C as percentage of original (max)%ASTM D 2171300


Above specifications may be subject to change.


Health & Safety

Detailed health and safety information for this product is provided in the Material Safety Data Sheet (MSDS), available upon request through your local sales representative or from

All trademarks used herein are trademarks of Exxon Mobil Corporation or one of its subsidiaries.


Further Information

ExxonMobil supplies a full range of bitumen, waxes, white oils, process oils and a full range of other lubricants, fuels and chemical products worldwide. Please contact your local ExxonMobil representative, or contact us at for more information on other products.

Every care has been taken in the preparation of this information. To the extent permitted by applicable law, all warranties and/or representations, express or implied, as to the accuracy of the information are disclaimed, and no liability is accepted for the accuracy or completeness of the same.