Paving Bitumen TN
ExxonMobil asphalt , Tunisia
PENETRATION GRADED BITUMEN PRODUCTS
Paving Bitumen TN are penetration graded bitumen products derived from specially selected crude oils via carefully controlled refining processes.
The quality of ExxonMobil products is assured for every delivery. They are produced and controlled according to the ExxonMobil Global Product Integrity Management System, EN ISO 9000 or equivalent standard.
Paving Bitumen 35/50 TN grades are recommended for road construction. If other applications are considered, then users should conduct appropriate testing before use.
Properties & Specifications
Paving Bitumen 35/50 TN grades meet the following specification requirements:
|Paving Bitumen grades||35/50 TN|
|Penetration at 25°C||x 0.1 mm||EN 1426||35-50|
|Softening point||°C||EN 1427||50-58|
|Flash point (min)||°C||ISO 2592||240|
|Solubility in toluene (min)||% (m/m)||EN 12592||99.0|
|Paraffin wax content (max)||% (m/m)||EN 12606-2||4.5|
Resistance to hardening: Rolling Thin Film Oven Test at 163 °C (EN 12607-1)
|Change of mass (max) +/-||%||EN 12607-1||0.5|
|Retained penetration (min)||%||EN 1426||53|
|Softening point after hardening (min)||°C||EN 1427||52|
Above specifications may be subject to change.
Health & Safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.05-2020