Paving Bitumen EM Series

ExxonMobil Asphalt, Norway

PENETRATION GRADED BITUMEN PRODUCTS - NORWAY

Product Description

Paving Bitumen EM are penetration graded bitumen products derived from specially selected crude oils via carefully controlled refining processes.

 

The quality of ExxonMobil products is assured for every delivery. They are produced and controlled according to the ExxonMobil Global Product Integrity Management System, EN ISO 9000 or equivalent standard.

 

Applications

Paving Bitumen EM grades are recommended for road construction. If other applications are considered, then users should conduct appropriate testing before use.

 

Properties and Specifications

Property

70/100 EM

160/220 EM

Change in Mass, on EN 12607-1 Residue, %, EN 12607-1

0.8

1.0

Dynamic Viscosity @ 60 C, Pa.s, EN 12596

90

30

Flash Point, Cleveland Open Cup, °C, EN ISO 2592

230

220

Fraass Breaking Point, °C, EN 12593

-10

-15

Increase in Softening Point, on EN 12607-1 Residue, °C, EN 1427

9

11

Kinematic Viscosity @ 135 C, mm2/s, EN 12595

230

135

Penetration, 25 C, 0.1 mm, EN 1426

70-100

160-220

Retained Penetration, on EN 12607-1 Residue, %, EN 1426

46

37

Softening Point, °C, EN 1427

43-51

35-43

Solubility in Toluene, wt%, EN 12592

99.0

99.0

 

Health and Safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.


11-2019

Further Information

ExxonMobil supplies a full range of bitumen, waxes, white oils, process oils and a full range of other lubricants, fuels and chemical products worldwide. Please contact your local ExxonMobil representative, or contact us at www.exxonmobil.com for more information on other products.

Every care has been taken in the preparation of this information. To the extent permitted by applicable law, all warranties and/or representations, express or implied, as to the accuracy of the information are disclaimed, and no liability is accepted for the accuracy or completeness of the same.