Mobil Super™ 2000 X1 10W-40
Mobil Passenger Vehicle Lube, Colombia
Product Description
Mobil Super™ 2000 X1 10W-40 is a synthetic technology oil that provides long engine life and protection against sludge and wear.
Features and Benefits
Mobil Super™ 2000 X1 10W-40 is fully tested in the industry so you can have complete confidence that you will get the performance you want from your vehicle.
Mobil Super™ 2000 X1 10W-40 provides:
• Better prevention of sludge formation
• Excellent engine cleanliness
• Excellent protection at high temperatures
• Excellent wear protection
• Good cold start performance
Applications
Mobil Super™ 2000 X1 10W-40 is formulated to give you confidence that your engine is receiving protection that goes far beyond what conventional oils can provide. ExxonMobil recommends it if you occasionally experience demanding driving conditions:
• Older engine technologies
• Gasoline and diesel engines without diesel particulate filters (DPF)
• Passenger vehicles, SUVs, light trucks and vans
• Highway cruising and city stop-and-go driving
• Normal to occasionally severe operating conditions
Always refer to your owner's manual to check the recommended viscosity grade and specifications for your specific vehicle
Specifications and Approvals
| 
             This product has the following approvals:  | 
        
| 
             VW 501 01  | 
        
| 
             VW 505 00  | 
        
| 
             This product is recommended for use in applications requiring:  | 
        
| 
             ACEA A3/B3-16  | 
        
| 
             API CF  | 
        
| 
             This product meets or exceeds the requirements of:  | 
        
| 
             API SN  | 
        
| 
             API SN PLUS  | 
        
| 
             API SP  | 
        
Properties and Specifications
| 
             Property  | 
            
             
  | 
        
| 
             Grade  | 
            
             SAE 10W-40  | 
        
| 
             Noack Volatility, mass%, ASTM D5800  | 
            
             9.1  | 
        
| 
             Flash Point, Cleveland Open Cup, °C, ASTM D92  | 
            
             235  | 
        
| 
             Kinematic Viscosity @ 40 C, mm2/s, ASTM D445  | 
            
             102.3  | 
        
| 
             Hi-Temp Hi-Shear Viscosity @ 150 C 1x10(6) sec(-1), mPa.s, ASTM D4683  | 
            
             3.8  | 
        
| 
             Kinematic Viscosity @ 100 C, mm2/s, ASTM D445  | 
            
             14.7  | 
        
| 
             Density @ 15.6 C, g/ml, ASTM D4052  | 
            
             0.87  | 
        
| 
             Viscosity Index, ASTM D2270  | 
            
             149  | 
        
| 
             Pour Point, °C, ASTM D97  | 
            
             -36  | 
        
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
09-2024