We use cookies to help personalise your web experience and improve our websites. To find out more about what cookies are, how we use them and how to delete them, see our Cookie Statement. By continuing to use this site, you are consenting to the use of cookies.


ExxonMobil issues guidance for switching to low sulphur fuel

ExxonMobil Marine Ship at Port

The fuels landscape is set to dramatically change when the International Maritime Organization’s (IMO) 0.5% sulphur cap comes into force on 1 January 2020. Ahead of this, we have come up with some top tips to help the marine industry switch to low sulphur fuels while maintaining a vessel’s safe and reliable operation.

First, establish best practise: Prevention is always better than cure so it is advisable to:

  • Buy fuel that meets the latest ISO 8217:2017 specification
  • Only bunker from reputable fuel suppliers
  • Clean out bunker tank residues when necessary

Test for cat fines: Some new 0.5% sulphur fuels could contain elevated levels of cat fines, which if not properly treated, could trigger catastrophic engine damage. If laboratory testing shows a high concentration then:

  • Maintain storage tank temperatures at least 10°C above fuel pour point
  • Keep settling tanks at 85°C
  • Operate purifiers at optimum efficiency and minimum throughput
  • Drain water from fuel tanks to aid settling

Check for compatibility: There is a risk that two compliant fuels will not be compatible, which can trigger damaging sludge formation. It is therefore essential to:

  • Test the fuels for compatibility, ideally in a laboratory
  • Store fuels separately until testing has been carried out
  • If mixing is unavoidable, avoid comingling in excess of 80:20 mix ratio

Monitor for sludge: If sludge does start to form, it is essential to ensure against further fuel blending before any remedial action is taken as this may exacerbate the problem. Then:

  • Operate two or more separators in parallel at their lowest throughput
  • Increase the frequency of purifier discharge
  • Monitor and clean filters frequently

Depending on its features, it may also be possible to use a next generation cylinder condition monitoring service to test a fuel’s sulphur content in order to confirm it meets the revised IMO sulphur cap. Using fuels that do not comply with the emissions regulations could result in costly penalties.